All That Scraps Blog

Creation DT - Isabelle - One page Home Sweet Home

Hello,

Today is my first post here, my name is Isabelle, I'm living in the french part of Switzerland and I'm happy to be here !

I'm so excited to show you my first creation for CC Designs Rubber Stamps. I hope you will like it ! Now up to page

some details :

 

Material :

Studio Calico by American Crafts Here & There : 6x6 paper pad / epoxy brads / Die Cut Shapes

DoodleBug Designs : Washi Tape-Tangerine Swiss Dot

Queen & Co. : Orange Twinkle Blooms

Bye

Isabelle

DT CC Designs RubberStamps

Hello everyone,

My name is Maranda and i am one of the new designers of CC Designs RubberStamps. Iam 33 years old , live in the Netherlands and work in the healthcare . Love to make scrapprojekts and cards.Iam so happy to join this team.

This little projekt is a little canvas painting only i have used it wrong ,instead to stick something on the good side , i have stick my papers on the wrong site, to give a little more deep for the effect.

In my postpackage that i receive ,, so much great things here a list bellow

What have i used for this little painting :

May arts white pink ribbon
Petaloo Velvet hydrangeas Canary yellow
Teresa Collins Summer Stories Enamel dots
Teresa Collins Summer Stories Decorative buttons
Teresa Collins Summer Stories Clear stamp
Teresa Collins Summer Stories 6x6 paperpad

I hope you enjoy my first DT Projekt , hope to see you soon back Bye Bye  

Maranda

Review Preview June C.C. Designs Stamps

It is time for the C.C. Designs review the previews! 

 

Designed by Simone:

Snorkles
Beach Logos 
Amy R Oh so Beachy Sentiments
Bubbles Die

 

Designed by Christa:

Stamps: Meoples Once Upon

Simply Enchanting Sentiments 

Dies: C.C. Designs Cutters Banner Accessories Die

C.C. Designs Cutters Banner Day Die

 

 

Designs by Amy Young

Swiss Pixie Snorkels

 

Designed by Mae

Once upon

Simply Enchanting Sentiments

 

Designed by Anita 

CC Designs Snorkles

 

Oh So Beachy Sentiments by AmyR

 

CC Designs Cutter Olive Branch Die

 

CC Designs Cutter Shell Die

 

Designed by Mary

C.C. Designs Swiss Pixie Birgitta w/ Popsicle, Summer Sentiments and C.C. Cutters Curly-Q border Die

 

Designed by Eva

Meoples Once Upon, Simply Enchanting Sentiments, Webbie's Words Baby Cakes Sentiments, Cube Box Die, Frilly Banner Die, and Mini Alpha & Numbers Die

 

Designed by Nancy

Swiss Pixies Snorkles
Oh So Beachy Sentiments
Bubbles Cutters
Starfish and Shell Cutters

 

Designed by Nancy

Paradise
Four Season Tree Cutters

 

Designed by Martine

once upon

Thank you for stopping by today-

Christine

 

 

Follow my blog with Bloglovin

Design Team Make it Monday

Hi,

Today I want to show how to make a swing card.

These are the items I have used:


We begin with a sheet of cardstock, 15cm by 30cm which is rilled in the middle at 15 cm. And a sheet of designpaper: 14.5cm by 14.5cm
The sheet of designpaper is glued to one side of the cardstock.

We use an oval die to cut an oval in the card where the designpaper is glued.

This is the result:

Next we get the digi stamp Nora on a swing, we give it some color and then we cut it out.
Be sure not to cut too small on the top where the rope is because it will break to easily.
Then use a needle to make a small hole in the rope of the swing and just above the oval that was cut out (see the photo below).

Use the rings to connect the swing to the card. This way she can actualy swing.

Place some sticky tape above the oval and place the stump.



And now the card is ready. Feel free to decorate the card some more.

Thanks for reading and till next time.

Greetings Martine

DT Make It Monday - Alphabet and cubes

 

Welcome to a new issue of DT Make It Monday. Today it's my turn and I want to show you how to make a cute gift with C.C. Cutters dies.

 

I needed a gift for Mother's Day and bought a beautiful pot of flowers. Now I still needed a matching card. But why always giving away cards? Then I saw the C.C. Cutters Cube Box die and Christine's cute baby tower came into my mind. That's it!

 

I took the C.C. Cutters Bubble Alphabet die. You see that it is one big die but of course you can also cut single letters. It's so easy!

 

Just cut your cardstock into little pieces and only cover the letters you want to cut with it.

 

Run the die with the cardstock pieces trough your cutting machine.

 

And you will get single letters.

 

I needed 'MAMA' which is Mum in German.

 

Then I cut four C.C. Cutters Cube Boxes, adhered them together and decorated the cube bar with different die cuts.

 

And this is the whole gift set. My mother liked it a lot!

Hugs,
Jay Jay

 

DT Make it Monday - fussy cutting hints & tips

Hello everyone!  It's Mary J here with a few hints and tips of how I do my fussy cutting - I've had a lot of questions about it so I hope this will go some way to help you!  First off, here is my card where I used this technique...

 

 

Isn't she beautiful?  This is Drozy's Darlings Letter For You and I also used a sentiment from the  .  AmyR Stamps Sunny Sentiments set. As you can see, I have cut around her and also in between the gap of her leg and wing.  Here are the tools I use...

 

In order from left to right:

1. Serrated scissors (Tim Holtz)
2. Craft knife (Xcut)
3. rounded sanding tool
4. flat sanding tool

I don't think I need to tell you how to actually these tools!  But here are a few things I do to get a good result:

• First of all, I always cut around the image, say 2cm all round so that I don't have large pieces of card getting in my way as I cut round.
• Don't try to get a perfect cut out using your scissors the first time you go round.  You can always go back to trim more off but you can't put it back!
• Make sure your craft knife is sharp - you should be able to cut with quite light pressure.  If you find you are having to press down hard to get a cut, they are not sharp enough.
• Don't worry if the edges aren't completely smooth and rounded (especially around those tight corners) - this is where the sanding tools come in.  For the outer side of the cut out image, I use the flat sanding tool to smooth it out.  I use the rounded sanding tool in the inside cuts.

That's it!  I hope that was useful.  If you have any questions, leave a comment to this post and I will get back to you.  I'm off now but I'll see you again for another Make It Monday in the future!

Mary J

 

Wednesday Review

Hi there, I didn't get this until this morning.  Super cute job, Delphine!!

She used Drozy's Darlings Dress Up for this one.  Have a great day everyone!!  :)

 

 

Created by Anita using Drozy's Darlings Mom's Heels and Olive Branch Die

DT Make it Monday - how to store your dies

Hi there, it's Simone here today to show you my new favorite die storage idea! You may already know the Clear Binder Box to store mounted rubber stamps? I really love them. The stamps are so easy to store, they are protected and you can grab them easily or take the whole Binder with you to crops =) 

So I was really happy when I saw the Magnetic Panels in the ATS-Shop because they also fit in the Binder Box and hold a huuuuuuge number of dies! The Magnetic Panels comes in a pack of 3 and 12 Panels filled with dies fits easily in one Binder.

Organize and store all your metal dies securely with EZMagnetic 2-N-1 Panels which magnetically grip on one side. For added versatility, 2-N-1 panels hold clear and cling rubber stamps on the reverse side! EZMagnetic 2-N-1 panels fit perfectly in the Mini Storage Binder for quick identification and compact portable storage. Package includes three (3) EZMagnetic panels 5.5" x 8.25".

 

I'm so happy with the Magnetic Panels - look how organized my dies are:

I have sorted my dies, for example every Theme got an own Panel: "Banners", "Winter/Christmas", "Halloween", "Alphabet",... 

To have a better look at all my dies I cut them out of white cardstock and glue them on black cardstock. I wrote the name of the dies under the diecut - so if I write a post on my blog it's easy for me to find the name of the die. I store these black sheets in an A4-Binder for a better overview. 

...I also use these diecuts for meassurements...

Let me know if you like this idea? For me it works perfect!

You can find everything in the ATS-Shop: "Stamp Binder Box", "Magnet Panels" and 

"Inserts". 

Thanks for stopping by - have a nice week =)

Simone

Review

Today we are reviewing the April Sweet November stamps.  The girls have created some cute stuff for you.  Enjoy!

 

Created by Amy using Jilly and Emaline's Secret

.

. 

Created by Delphine using Josie's Brella, CC Cutters Clouds and Mini Alpha & Numbers Dies

.

.

Created by Eva using Josie's Brella and AmyR Welcome Little One sentiments

.

.

Created by Simone using Piper and Mia Banner Day, AmyR Winged Greetings, Butterfly Border die

.

.

Created by Martine using Josies Brella, Jilly & Emaline Sectet, Olive Branch, Five Point Flower, Butterfly Banner, Four Seasons Tree

.

.

.

.

.

.

.

.

.

Created by Christa using Jilly and Emaline Secret, Romantic Grunge, Romantic Alphabet

 .

Created by Nancy using Josie's Umbrella and AmyR. Eggstra Special Sentiments

.

.

.

Thanks for stopping by!  We will focus on a customer for tomorrows post.  

.

.

 

Jilly & Emaline's Secret	Josie's Brella	Clouds die	Mini Alpha & Numbers
Welcome Little One Sentiments	Piper & Mia Banner Day	Romantic Grunge	Five Point Flower
Winged Greetings	Olive branch	C.C. Designs Cutters Butterfly Border Die	C.C. Designs Cutters Four Season Tree Die
Romantic Alphabet

InLinkz.com

Anything but a card

Hi there, Martine made us a beautiful stamped book to show you today.  I hope you all enjoy it.  Great job girl!!!  

 

She used Piper and Mia Banner Day, Josies Brella

 

 

Thanks for stopping by. Tomorrow we will be reviewing the April Sweet November stamps.  Have a great day!!